AERO RANGER FORUM

PILOT SUPPORT

User avatar
BY admin
#4
Zoom support in AeroRanger is patchy as DJI does not provide consistent zoom support to 3rd party software developers via the SDK.

It has not been possible to test all DJI cameras as physical access to the camera is required.

To zoom your camera using AeroRanger, use the small square buttons on the back of the RC controller, known as the C1 and C2 buttons.

The right hand button (C2) will drive the zoom forward (zoom in)
The left hand button (C1) will drive the zoom backward (zoom out)
If your camera does not respond when you press these buttons, then it’s likely that zoom is not supported on your model through AeroRanger.

Be aware that zoom is not currently taken into account when planning overlaps/sidelaps for some mission types (eg. Survey/Area missions), so please set your camera to fully zoomed out for these missions to ensure correct coverage.
WHAT IS THE HOME POINT?

A critical part of any mission is the Home point.

SUPPORTED DRONE MODELS

Most recent DJI drone models are supported

HOW DO I CHANGE CAMERA SETTINGS?

Camera setting have recently had a major revamp.

How do I zoom the camera

To zoom your camera using AeroRanger

TRY OUT AERORANGER